Memphis Premium Roofing provides professional fascia & soffit in Memphis, TN for residential and commercial properties across the Mid-South. The fascia and soffit on a brick house are the joint where two materials that move at different rates must stay together. That joint is where rot starts here, and it is the one place a roofer can see whether the wall plate is still fastened.
Rot in Memphis follows water, and water on these houses follows three paths. Behind a gutter that has been overflowing at the back edge for years. Down the run of a leaking downspout joint. And in at the corners, where the fascia returns meet and the end grain sits exposed to every rain the west side of the house gets. We probe all three before quoting, because surface paint hides a great deal.
What sits behind the fascia is the part worth the inspection. On a brick veneer house the top course of masonry, the wall plate above it and the rafter tails bearing on that plate are all concealed by the soffit. Opening it is the only way to find a plate rotted at its anchors or veneer ties rusted through, and while we do not fix those, we are often the first to see them.
Replacement material is a real decision and not all of it is equivalent. Primed finger-jointed pine back-primed on all six faces will outlast site-primed lumber by years. Cellular PVC does not rot at all and is the right answer at the corners and behind gutters. Fibre cement holds paint well on long straight runs. We mix them by exposure rather than quoting one material for the whole house.
Soffit is also the intake half of the attic ventilation system, and on older Memphis houses it usually is not working. Continuous vented panel or a proper strip vent, with baffles at the rafter bays so blown insulation cannot bury the opening. Replacing soffit without solving the intake is a missed opportunity that costs nothing extra at the time. Intake without exhaust does nothing either, so we check the ridge on the same visit.
Coil-wrapping decayed timber is the one job we decline outright. It is quick, it looks finished, it is common in this city, and it seals damp against rotten wood where nobody will lay eyes on it again until the rafter tail finally lets go. We would rather explain that than take the money.
Our licensed and insured team brings the right materials and equipment to every job — two 3/16-inch by 1-inch chimney anchor straps at the roof line, twelve-inch strap embedment into a masonry chimney, roof-deck subdiaphragm crossties in the perimeter bays, parapet height-to-thickness bracing ratio, wall anchors at six-foot maximum spacing, out-of-plane wall anchorage at 42 pounds per square foot — and backs the work with a written workmanship warranty. We serve Memphis and nearby communities including Bartlett, Collierville, Germantown, Millington.
What We Handle
Everything our fascia & soffit in Memphis covers
One crew, one point of contact, and the full range of fascia & soffit work in Memphis, TN. If it is on this list we do it in house rather than handing it to a subcontractor:
- fascia repair memphis
- soffit repair memphis tn
- fascia and soffit replacement memphis
- rotted fascia memphis
- vented soffit memphis
- pvc fascia board memphis
- soffit vent installation memphis
- fascia board replacement cost memphis
- eave repair memphis
- soffit contractor shelby county
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Memphis services.
Materials, equipment and how we do fascia & soffit
The difference between fascia & soffit that lasts and fascia & soffit that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with two 3/16-inch by 1-inch chimney anchor straps at the roof line, twelve-inch strap embedment into a masonry chimney, roof-deck subdiaphragm crossties in the perimeter bays, parapet height-to-thickness bracing ratio, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Memphis job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in the Mid-South means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do fascia & soffit outside Memphis
Memphis Premium Roofing covers Memphis and the surrounding communities of the Mid-South. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Fascia & Soffit in Bartlett, TN — Shelby County, population 57,786
- Fascia & Soffit in Collierville, TN — Shelby County, population 51,324
- Fascia & Soffit in Germantown, TN — Shelby County, population 41,333
- Fascia & Soffit in Millington, TN — Shelby County, population 10,582
- Fascia & Soffit in Arlington, TN — Shelby County, population 14,549
- Fascia & Soffit in Lakeland, TN — Shelby County, population 13,904
Start on the Memphis Premium Roofing homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Memphis Chooses Memphis Premium Roofing
- ✓Every proposal states the new covering's dead load in pounds per square foot next to the load of whatever comes off, because Shelby County is a Seismic Design Category D jurisdiction and weight is not a decorative question here.
- ✓Our inspection report includes the chimney's anchorage at the roof line, the parapet's unbraced height and the deck fastening where it meets masonry, three findings that are almost never on a Memphis roof report.
- ✓We tear off rather than overlay, because a tear-off is the only hour in which the chimney straps, the deck fastening and the top of the wall are all visible at the same time.
- ✓We turn down tile on existing stick-framed houses unless a Tennessee-licensed structural engineer has written down what the framing can carry, and we will help you find that engineer.
The standards behind fascia & soffit
Quality here is not a matter of opinion — it is written down. The fascia & soffit work we do in Memphis follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every fascia & soffit project in Memphis gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free fascia & soffit free estimate in Memphis, or request a quote and we'll get right back to you.